Shock mounting kit for 33.83mm wide spans. Bushings are best for the relatively stationary end of your shock (little to no rotation taking place inside the shock eyelet). Our Needle Bearing Kits are recommended for high-rotation applications. These bushing kits are designed for 8mm shock mounting bolts. They can be adapted to 6mm hardware.

Because shock eyelet bores vary in actual Inside Diameter, two bushings are included. Install the plastic bushing first. If the reducers are a firm fit, you are good to go. If the fit of the reducers is loose, press out the plastic bushing and install the metal bushing for a tighter fit.

Includes:
1 pcs IGUS plastic bushing
1 pcs metal bushing lined with dry lubricant
2 pcs anodized aluminum spacers/reducers
Fits all shocks with 15mm eyelet bores (as measured with the bushing removed).

This includes:
All Fox rear shocks
RockShox, all modern shocks (Monarch, Vivid, Deluxe, SIDLuxe)
RockShox Ario shocks 2010 and later
X-Fusion Shocks 2011 and newer
All Marzocchi Rocco shocks
All Elka shocks
All Cane Creek "Inline" shocks
All Diverse/Dueler shocks