Two tools in one! This wiper press tool covers all 38mm AND 40mm forks that use a unified "wiper seal." (If your fork uses a separate oil seal, you will need one of our "seal and wiper press tools"). One side of this press tool will work on ALL 38mm wipers whether flanged or flangeless. The other side of the tool will work on ALL 40mm wipers whether flanged or flangeless.

This tool automatically sets flangeless wipers to their proper depth in the seal head. This tool uses a special extension or "bushing pilot" at each end that enters the lower assembly and interfaces with the bushings the same way your fork's stanchion tubes do. This results in perfect alignment of the wipers before they are pressed in. It is simply impossible to get the wipers "cocked" at an angle when installing with this tool.

Designed and manufactured in the USA.