This combination KCNC/RWC Headset is beautifully machined with both weight reduction and aesthetics in mind. Strength and durability are equally considered with Enduro stainless steel angular contact bearings as our choice for strength and corrosion resistant performance. A crown race for a tapered steer tube is included. If you would like to run a straight 1-1/8" steer tube in this headset, a special crown race is available for purchase separately. This headset uses an internal cup on top and an external cup on the bottom.
An 1-1/8" Enduro stainless steel angular contact bearing is used in the upper cup, with a 1.5" Enduro stainless steel angular contact bearing in the lower, external cup.
BEARINGS GUARANTEED FOR 5 YEARS
THIS IS A COMPLETE HEADSET DESIGNED TO BE INSTALLED IN A 44MM INSIDE DIAMETER HEAD TUBE.
FORK STEER TUBE SHOULD BE 1.5 x 1-1/8 INCH TAPERED.
CAN BE USED WITH STRAIGHT 1-1/8 INCH STEER TUBES WITH SEPARATELY AVAILABLE REDUCER CROWN RACE.
--Crown Race for 1-1/8" Steer Tube
--Enduro ACB 1-1/8" Stainless Bearing(top cup)
--Enduro ACB 1.5" Stainless Bearing (lower cup)
--Internal Top Bearing Cup
--External Lower Bearing Cup
--Bearing Cover Shims
--Top Cap Bolt