Welcome to REAL WORLD CYCLING
International orders are now shipping via DHL for fast and dependable service--usually delivered within one week!
Fits standard "BSA" threaded bottom bracket shells using Left and Right cups. With the right cranks, can also be used on 100mm and 120mm FATBIKES. Not all BB30 cranks are compatible due to varying spindle lengths. Some of the cranksets known to be compatible include:
e13 Mountain Cranks
Race Face Next SL cranks
Race Face SIXC Cinch
Race Face Turbine Cinch
Rotor 3D+ cranks
BB386 EVO Road Cranks
Cane Creek eeWings MTB cranks
Angular contact bearings are a step forward in outboard bottom bracket design. Why? Deep groove radial ball bearing cartridges are not designed to be "adjusted." Any inward or outward pressure on the inner races put them out of alignment with the outer races, forcing the balls to ride up the side of the groove and exerting greater pressure on the races. This results in increased friction and premature wear. Since almost all outboad crank sets exert some inward pressure on the bearings when installed, it only makes sense to use a bearing designed specifically for such loads. Angular contact bearings result in 100% ball engagement when properly pre-loaded.
The bearings are the core component of a bottom bracket system. Of course we use the best. However, it is apparent that not all bottom bracket manufacturers realize that the bearing-to-cup fit has a huge effect on bearing performance. If the fit is too tight, the internal clearance for the ball bearings is reduced, resulting in friction, heat, and premature demise. While our bottom brackets are visually pleasing, our primary focus is on a perfectly toleranced fit. If, after the color anodizing is completed, the fit with the bearing is not perfect, we take the time to re-machine the bearing seat of the cup.
Suitable wrenches for installation include the RWC BB30 Outboard Bottom Bracket Cup Tool, Race Face Cinch BSA 30
No items in your cart