This is the recommended tool for installing new bearings on your Ultra-Torque® or Racing Torq® crankset. Unlike other outboard systems, the Campy/Fulcrum designs have the bearings pressed onto the spindles (rather than into the cups). This requires the pressing force to be applied to the inside race of the bearing.

THIS BEARING GUIDE SET WORKS BEST IN CONJUNCTION WITH THE ENDURO HUB BEARING PRESS, although you may improvise a threaded rod, washers, and nuts. The bearing is manually started onto the spindle, the small OD spindle support placed inside the spindle, and the bearing press cup placed over the end of the spindle. The handle set (not included) can then be inserted through the center and the bearing pressed into place.