RWC SHOCK EYE NEEDLE BEARING KITS

NBKRWC1575 $18.99

(w/Teflon® SPACER/SEALS)

Upgraded kit includes 3 inner rings ("-", "+" and "++" tolerance) to allow for a "customized" fit regardless of variations in shock eyelet bore tolerances.

(shims only needed to match spans that fall between kit sizes)

--Converts 15mm SHOCK EYELET from DU Bushing to Needle Bearing

--NOMINAL FACE-TO-FACE SHOCK REDUCER WIDTH OF 15.75mm

--Works with your 6mm OR 8mm BOLT (includes adapter sleeve)

--Teflon spacer/seals

(INCLUDES PARTS FOR ONE SHOCK "EYE")

Upgraded kit includes 3 inner rings ("-", "+" and "++" tolerance) to allow for a "customized" fit regardless of variations in shock eyelet bore tolerances.

(shims only needed to match spans that fall between kit sizes)

--Converts 15mm SHOCK EYELET from DU bushing to Needle Bearing

--NOMINAL FACE-TO-FACE SHOCK REDUCER WIDTH OF 19.05mm

--Compatible with existing 6 OR 8mm BOLT (includes reducer sleeve)

--Anodized aluminum spacers with integrated seals

(INCLUDES PARTS FOR ONE SHOCK "EYE")

Upgraded kit includes 3 inner rings ("-", "+" and "++" tolerance) to allow for a "customized" fit regardless of variations in shock eyelet bore tolerances.

GET SHIMS FOR THIS KIT

(shims only needed to match spans that fall between kit sizes)

--Converts 15mm SHOCK EYELET from DU Bushing to Needle Bearing

--NOMINAL FACE-TO-FACE SHOCK REDUCER WIDTH OF 21.85mm

--Works with your 6mm OR 8mm BOLT (includes adapter sleeve)

-Anodized aluminum spacers with integrated seals

(INCLUDES PARTS FOR ONE SHOCK "EYE")

Upgraded kit includes 3 inner rings ("-", "+" and "++" tolerance) to allow for a "customized" fit regardless of variations in shock eyelet bore tolerances.

THIS KIT IS SPECIFIC TO SANTA CRUZ NOMAD 1 & 1.5 FRAMES

(NOMAD 2 FRAMES USE KIT NBKRWC2185)

THIS KIT IS SPECIFIC TO THE SWING LINK MOUNT

--Converts 15mm SHOCK EYELET from DU Bushing to Needle Bearing

--NOMINAL FACE-TO-FACE SHOCK REDUCER WIDTH OF 21.85mm

--Anodized Aluminum Spacers with Integrated Seals

--INCLUDES NEW STAINLESS STEEL BOLT & NYLOCK NUT

-INCLUDES 3/8" to 8mm BOLT ADAPTERS

(INCLUDES ALL PARTS TO CONVERT SHOCK "EYE" AT SWING LINK)

Upgraded kit includes 3 inner rings ("-", "+" and "++" tolerance) to allow for a "customized" fit regardless of variations in shock eyelet bore tolerances.

GET SHIMS FOR THIS KIT

(shims only needed to match spans that fall between kit sizes)

--Converts 15mm SHOCK EYELET from DU Bushing to Needle Bearing

--NOMINAL FACE-TO-FACE SHOCK REDUCER WIDTH OF 22.20mm

--Works with your 6mm OR 8mm BOLT (includes reducer sleeve)

--Anodized aluminum spacers with integrated seals

(INCLUDES PARTS FOR ONE SHOCK "EYE")

Upgraded kit includes 3 inner rings ("-", "+" and "++" tolerance) to allow for a "customized" fit regardless of variations in shock eyelet bore tolerances.

(shims only needed to match spans that fall between kit sizes)

--Converts 15mm SHOCK EYELET from DU bushing to Needle Bearing

--NOMINAL FACE-TO-FACE SHOCK REDUCER WIDTH OF 25.40mm

--Compatible with existing 6 OR 8mm BOLT (includes reducer sleeve)

--Anodized aluminum spacers with integrated seals

(INCLUDES PARTS FOR ONE SHOCK "EYE")

Upgraded kit includes 3 inner rings ("-", "+" and "++" tolerance) to allow for a "customized" fit regardless of variations in shock eyelet bore tolerances.

(shims only needed to match spans that fall between kit sizes)

--Converts 15mm SHOCK EYELET from DU Bushing to Needle Bearing

--NOMINAL FACE-TO-FACE SHOCK REDUCER WIDTH OF 30mm

--Works with your 6 OR 8mm BOLT (includes reducer sleeve)

--Anodized aluminum spacers with integrated seals

(INCLUDES PARTS FOR ONE SHOCK "EYE")

Upgraded kit includes 3 inner rings ("-", "+" and "++" tolerance) to allow for a "customized" fit regardless of variations in shock eyelet bore tolerances.

THIS KIT IS SPECIFIC TO IRON HORSE BIKES

FROM MODEL YEAR 2007 ONWARDS

WITH 30MM SPANS AND 10MM HARDWARE

--Converts 15mm SHOCK EYELET from DU Bushing to Needle Bearing

--NOMINAL FACE-TO-FACE SHOCK REDUCER WIDTH OF 30mm

--Anodized Aluminum Spacers with Integrated Seals

--INCLUDES NEW STAINLESS STEEL

HARDWARE AND ADAPTERS

(INCLUDES PARTS FOR ONE SHOCK "EYE")

Upgraded kit includes 3 inner rings ("-", "+" and "++" tolerance) to allow for a "customized" fit regardless of variations in shock eyelet bore tolerances.

(shims only needed to match spans that fall between kit sizes)

--Converts 15mm SHOCK EYELET from DU Bushing to Needle Bearing

--NOMINAL FACE-TO-FACE SHOCK REDUCER WIDTH OF 33.83mm

--Works with your 6 OR 8mm BOLT (includes reducer sleeve)

--Anodized aluminum spacers with integrated seals

(INCLUDES PARTS FOR ONE SHOCK "EYE")

Upgraded kit includes 3 inner rings ("-", "+" and "++" tolerance) to allow for a "customized" fit regardless of variations in shock eyelet bore tolerances.

(shims only needed to match spans that fall between kit sizes)

--Converts 15mm SHOCK EYELET from DU Bushing to Needle Bearing

--NOMINAL FACE-TO-FACE SHOCK REDUCER WIDTH OF 35.5mm

--Works with existing 6mm or 8mm Hardware (includes reducer sleever)

--Anodized Aluminum Spacers with Integrated Seals

(INCLUDES PARTS FOR ONE SHOCK "EYE")

Upgraded kit includes 3 inner rings ("-", "+" and "++" tolerance) to allow for a "customized" fit regardless of variations in shock eyelet bore tolerances.

GET SHIMS FOR THIS KIT

(shims only needed to match spans that fall between kit sizes)

--Converts 15mm SHOCK EYELET from DU Bushing to Needle Bearing

--NOMINAL FACE-TO-FACE SHOCK REDUCER WIDTH OF 39.88mm

--Works with your 6mm OR 8mm BOLT (reducer sleeve included)

--Anodized Aluminum Spacers with Integrated Seals

(INCLUDES PARTS FOR ONE SHOCK "EYE")

Upgraded kit includes 3 inner rings ("-", "+" and "++" tolerance) to allow for a "customized" fit regardless of variations in shock eyelet bore tolerances.

THIS KIT IS SPECIFIC TO TREK SESSION AND SCRATCH BIKES

WITH 40MM SPANS AND 10MM HARDWARE
FOLLOW THE LINK ABOVE FOR SPECIFICS ABOUT FRAME MODEL FIT ISSUES

- FOR 15mm SHOCK EYELETS

-NOMINAL FACE-TO-FACE SHOCK REDUCER WIDTH OF 40mm

-INCLUDES NEW STAINLESS STEEL

HARDWARE AND ADAPTERS

(INCLUDES PARTS FOR ONE SHOCK "EYE")

Upgraded kit includes 3 inner rings ("-", "+" and "++" tolerance) to allow for a "customized" fit regardless of variations in shock eyelet bore tolerances.

GET SHIMS FOR THIS KIT

(shims only needed to match spans that fall between kit sizes)

--Converts 15mm SHOCK EYELET from DU Bushing to Needle Bearing

--NOMINAL FACE-TO-FACE SHOCK REDUCER WIDTH OF 41.15mm

--Works with your 6mm OR 8mm BOLT (reducer sleeve included)

--Anodized Aluminum Spacers with Integrated Seals

(INCLUDES PARTS FOR ONE SHOCK "EYE")

Upgraded kit includes 3 inner rings ("-", "+" and "++" tolerance) to allow for a "customized" fit regardless of variations in shock eyelet bore tolerances.

GET SHIMS FOR THIS KIT

(shims only needed to match spans that fall between kit sizes)

--Converts 15mm SHOCK EYELET from DU Bushing to Needle Bearing

--NOMINAL FACE-TO-FACE SHOCK REDUCER WIDTH OF 43.74mm

--Works with your 6mm OR 8mm BOLT (reducer sleeve included)

--Anodized Aluminum Spacers with Integrated Seals

(INCLUDES PARTS FOR ONE SHOCK "EYE")

GET SHIMS FOR THIS KIT

(shims only needed to match spans that fall between kit sizes)

--Converts 15mm SHOCK EYELET from DU Bushing to Needle Bearing

--NOMINAL FACE-TO-FACE SHOCK REDUCER WIDTH OF 50mm

--Works ONLY with 8mm BOLT

--Anodized Aluminum Spacers with Integrated Seals

(INCLUDES PARTS FOR ONE SHOCK "EYE")

GET SHIMS FOR THIS KIT

(shims only needed to match spans that fall between kit sizes)

--Converts 15mm SHOCK EYELET from DU Bushing to Needle Bearing

--NOMINAL FACE-TO-FACE SHOCK REDUCER WIDTH OF 54mm (Many Ventana Frames)

--Works with your 6mm OR 8mm BOLT (reducer sleeve included)

--Anodized Aluminum Spacers with Integrated Seals

(INCLUDES PARTS FOR ONE SHOCK "EYE")