CLICK ON PHOTO FOR MORE INFO $35.00/KIT

ENDURO BB30 TO SHIMANO HT2 BOTTOM BRACKET ADAPTER   All you need to run Shimano HT2 Road Cranksets on your BB30-standard Frame!  Precision machined 6061 aluminum....   CLICK FOR MORE INFORMATION

SILICONE BB SEALS CLICK ON PHOTO TO ENLARGE $2.50/Pair

ENDURO OUTBOARD BB AUXILIARY SEAL, LARGE OD 24mm ID x 41mm OD Silicone Seal Replacment set for Enduro Bottom Brackets and Enduro BB Upgrade Kits. For use with outboard BB cups using 24mm ID bearings and cups with stepped machining at the cup opening (measures 41mm where the seal sits).  V-seal at spindle, single lip seal at cup body. Sold in pairs   Qty

SILICONE BB SEALS 24mm x 37mm CLICK ON PHOTO TO ENLARGE $2.50/Pair

ENDURO OUTBOARD BB AUXILIARY SEAL, SMALL OD 24mm ID x 37mm OD Silicone Seal Replacment set for Enduro Bottom Brackets and Enduro BB Upgrade Kits. For use with outboard BB cups using 24mm ID bearings and cups with non-stepped machining at the cup opening (measures 37mm where the seal sits).  V-seal at spindle, single lip seal at cup body. Sold in pairs Qty

SILICONE BB SEALS, MADONE CLICK ON PHOTO TO ENLARGE $2.50/Pair

ENDURO TREK BB90/BB95 AUXILIARY SEAL KIT TREK and Gary Fisher Carbon Frame Specific While this seal may appear to be the same as the Enduro outboard cup seals, it has a specific taper for the 2008 and later Trek Madone frames with "slip fit" bearings. Also used Fuel EX Carbon, Top Fuel Carbon, Hardtail Carbon, Remedy Carbon, Gary Fisher Superfly 100, and other Trek and GF Carbon Road Frames.  V-seal at spindle, single lip seal at frame.   Sold in pairs Qty

SILICONE BB SEALS, BB30 CLICK ON PHOTO TO ENLARGE $2.50/Pair

ENDURO BB30 (30mm x 42mm) AUXILIARY SEAL KIT   For BB30 applications where the crankset spindle length allows an auxiliary seal to be placed over each bearing for added protection from the elements.  Originally developed by Cannondale, many frame makers are now offering BB30 options on their frames.  This set of seals will also fit the new "press fit" BB30 composite cups.    Sold in pairs Qty

FSA "TOP HAT" BEARING SHIM/COVER SET CLICK ON PHOTO TO ENLARGE $6.50/Pair

FSA OUTBOARD BB "TOP HAT" BEARING SHIM/COVER Steps Down 25mm ID Bearings to 24mm Use with any of our "6805" bearings to upgrade your FSA bottom bracket.  Re-use your original "top hat" O-rings or simply pack the space between the bearing and "top hat" with grease. Sold in pairs Qty

FC-M960 INNER COVER CLICK ON PHOTO TO ENLARGE $4.95 Each

SHIMANO XTR FC-M960 INNER COVER WITH O-RINGS Seals between BB cups to protect spindle and bearings. Use with any Shimano MOUNTAIN outboard bottom bracket cups.*  Compatible with "BB92" Shimano and Enduro Mountain Press-in Cups.   *68-73mm BB shell width. NOT for 83mm BB shells. Not suitable for Enduro bottom brackets (use the Enduro Aluminum Sleeve).  Qty

2.5mm BOTTOM BRACKET CUP SPACER CLICK ON PHOTO TO ENLARGE $1.99 Each

OUTBOARD BB 2.5mm CUP SPACER Goes between the BB shell and the outboard cup body. Use with any brand of MOUNTAIN outboard bottom bracket cups.*  Used for proper cup spacing and chainline adjustment.      *Follow manufacturer's instructions. Shimano/Enduro/Race Face may require up to three spacers. GXP bottom brackets use a maximum of 2 spacers. All Enduro bottom brackets ship with spacers included. MATERIAL: ANODIZED 6061 ALUMINUM Qty

2.5mm BB91 PRESS IN CUP SPACER CLICK ON PHOTO TO ENLARGE $3.89 Each

PRESS-FIT BB91 41A 2.5mm BB SPACER Goes between the BB shell and the Press-fit cup. REQUIRED FOR  PRESS FIT MOUNTAIN BB  SHELLS WITH WIDTH OF 89.5MM RUNNING BB91 PRESS-FIT BOTTOM BRACKETS     For use with Shimano® type Press Fit BB91 bottom brackets when installed on 89.5mm wide bottom bracket shells.  Only for Press In cups with insertion OD of 41mm.    MATERIAL: COMPOSITE Qty

24mm BB Spindle Spacer CLICK ON PHOTO TO ENLARGE $2.50 Each

FSA OUTBOARD BB 24mm SPINDLE SPACER Goes on the Spindle Between the Crank Arm and Bearing This rubber-coated metal ring compresses to about 1mm thickness.  Spacers are compatible with all outboard cranksets using a 24mm spindle/axle (including Shimano Hollowtech 2, Race Face X-Type, FSA, etc.)  They can be used to take up free axle space or to fine tune the chainline. Keep a few of these on hand to solve a variety of BB problems (one of these spacers corrected an alignment issue we had with a chainguide system).  Qty