Take a minute every few rides to help your
wipers protect your fork...
1)
Note the dust from the previous ride, particularly on the
scraper edge of the wiper:
2)
With a clean, soft cloth, carefully wipe off the stanchion tubes:
3)
Carefully remove the accumulated dust from the scraper edge of the
wipers:
4)
Apply Stanchion Lube® all the way around the stanchions, about
two inches above the wipers:
5)
Cycle the fork (compress it) several times and then look
for the "ring" of lube near the top of the stanchions (this ring will be discernable for a just a few seconds before the lubricant
begins to run down the stanchions):
6)
Using the soft felt pad, spread the accumulated ring of lubricant all
over the surface of the exposed stanchion tubes:
Repeat Steps 5-6 until excess Stanchion Lube is no longer visible.
You are now ready for a great, stiction-free ride!
